Learn basic eyelid sculpture: Making procedure & note handling errors 1

Learn basic eyelid sculpture: Procedures & note handling errors arising

Learn basic eyelid sculpture: Procedures & note handling errors arising

General Procedures in Cosmetic Sculpture:

Before sculpting:

  • Do the consulting work, find out the health status, preferences of guests. Customers have any kind of disease? Are there any noticeable keloids in the body? Observe whether the sculpt is inflamed, swollen, injured or scarred.
  • Advise guests on the effectiveness of sculpting. Things to note before eyelid carving, symptoms may appear during and after sculpting for guests to be mentally prepared
  • Do well in shaping, choosing colors that match the skin color of the guests. Should consult guests' opinions but not arbitrary way according to the customer's unreasonable requirements but should not be too disciplined.

Steps to conduct sculpture:

Step 1: After shaping the eyelid shape and the customer was satisfied. Take guests to bed, get hair bundles wrapped neatly, cover for guests.

Step 2: Conducting anesthesia for guests, note the incubation on each side to keep the anesthesia during the process. Incubate for 12 - 17 minutes depending on whether the skin is thin or thick. Pay attention to the skin around the incubation area, if the redness is already numb, remove the anesthesia and conduct sculpture, if left too long, the eyelids will be easily swollen and sharp when doing.

Step 3: Prepare sculpting tools: wrap stainless steel tray, sterilize damp cotton, prepare ring, ink, ink mixer, toothpick, gloves, mask, turn on the light.

Log In Your Student Nick To See More:

Content For Internal Training Only

Please login to view more content.

*Note: Because this is a copyrighted material and is only for internal circulation, we It is strictly prohibited to distribute or sell The content of this lesson is outward. Any violations found will be deleted account & can be handled in accordance with the law on copyright infringement.

After sculpting:

After finishing the engraving for guests to sit up, check the shape and contours of the eyelids engraved. If the eyelid is standard, we immediately put 5 - 6 drops of salt water to wash the eyes to clean, then use a hygienic moist ball and then apply tetracyline to lock color and anti-inflammatory, anti-swelling. Instruct guests to take care after sculpting: Apply tetracyline continuously for 3 days - if you do not apply the eyelids, the fibers will break, do not peel, avoid water for 3 days. After 3 days, wash the water normally, soak a cotton ball in water soaked on the eyelids to quickly peel.

HOW TO MAKE A REMINDER:

  1. Support Equipment

(engraved knife handle, blade, engraving ink, anesthetic, cotton ball, ...)

Thin blade used to sculpt about 2 pens with different functions. A pen helps you to focus and a pen helps push the ink.

  • The sculpting kit includes a small blade to flexibly attach to the two ends of the sculpting pen:
  • A pen with a dedicated blade attachment for key strokes
  • A pen tip with a design helps the blade to push ink into the skin easily without hurting or wasting time on ink repeatedly.

2. The Ink Color Engraved

(black, dark brown, green ink, red ink)

For eyelids not to be blue: Go straight in pure black ink (if the Queen ink)

If the crystal ink you have to add 1 drop of blue ink treatment tone color like betel nut to 6 drops of black ink (1: 6 ratio)

To treat red eyelid color: We will sculpt with red treatment ink directly on the part of the eyelids that are being red, then use the sculpted black color to overlap the part just treated until the black eyelids are back.

3. Process of implementation:

Step 1: Examination and consultation: A cosmetologist helps guests understand how to perform and choose eyelid colors to suit the face and skin color.

Step 2: Clean the eyelid area and local anesthesia. Incubate for 12 - 17 minutes depending on whether the skin is thin or thick

Step 3: Performing the sculpture: Must go the eyelid frame contour as eyelid drawing.

  • Create the eyelid frame from the middle to the tail so that the shape of the eyelid has been drawn. Then, move the frame back to the beginning with the same force.
  • Next you evenly carved the empty skin inside the eyelid frame.
  • Use a slanted blade to push the ink into the skin in a straight line from the tail back to the tip of the eyelid so that the eyelids are pitch black and glossy, and the blank skin on the frame stops.

Step 4: Use a spray machine with needle 1 to spray one last time for the black eyelid line as if it had applied vaseline, then we stop.

Log In Your Student Nick To See More:

Content For Internal Training Only

Please login to view more content.

*Note: Because this is a copyrighted material and is only for internal circulation, we It is strictly prohibited to distribute or sell The content of this lesson is outward. Any violations found will be deleted account & can be handled in accordance with the law on copyright infringement.

When walking 1 to 2 turns and see that the eyelids of the guests are appropriate STOP IMMEDIATELY. Then use a cold ultrasound machine or artificial ice to apply on the affected eyelids for 3-5 minutes for blood capillaries to shrink so the ink does not become smudged.

If the case of new eyelids first turn was edema and smudging, after applying cold we use a short needle spray a thin line for the eyelids and thin sculpture.

Then use the laser to erase the lowest energy

Limit wiping the eyelids maximum

Step 4: Cleaning the eyelid area just sculpted, we immediately put 5 - 6 drops of salt water to wash the eyes to clean, then use a moist cotton ball and then apply tetracyline to lock color and anti-inflammatory, anti-swelling.

Manipulation:

  • Insert the blade at an angle of 25 degrees diagonally from the handle and the tip of the blade upwards
  • Hold the knife firmly in position, the other hand use two thumbs and forefinger to lightly stretch the skin straight, so that the carving line is smooth, evenly, the ink will penetrate the skin more easily.
  • The right hand force is definitive, the wrist is relaxed, the tip of the knife penetrates into the skin about 0.5mm, the walking speed is slow and the light force is moderate, engraved to make the fine and sharp eyelids.
  • When skin incision should be noted: where the incision is to be soaked up, that the new etching is clear and beautiful.
  • Check whether the eyelid has eaten the ink by making slight scratches, if the ink or color is not seen, we use the opposite tip to gently engrave the opposite direction. Then use a toothpick to get a sufficient amount of ink spread evenly across the width of the eyelid contour just carved to let the ink penetrate. Next you use a cotton ball to wipe through the color to see if not, if not up, then do so again.

* How to handle errors in common sculpture:

Log In Your Student Nick To See More:

Content For Internal Training Only

Please login to view more content.

*Note: Because this is a copyrighted material and is only for internal circulation, we It is strictly prohibited to distribute or sell The content of this lesson is outward. Any violations found will be deleted account & can be handled in accordance with the law on copyright infringement.

Leave a Reply

Call Now Button
en_USEnglish
viVietnamese en_USEnglish